America's Most Trusted Snow/Ice Melting Systems
Snow Load Relief
Drain Protection
Rooftop Equipment
Ice Dam Prevention
Say goodbye to the costly damage caused by snow accumulation and keep your roof strong and secure all winter long
Keep rooftop drains, outdoor drainpipes, and scuppers free of damaging ice buildup
Clear snow buildup around rooftop equipment and provide safe walkways for maintenance crews
Clear snow and ice before it becomes a problem. Worry no more about snow and ice-caused roof damage
Product Specifications
Product | Compatible with | Amperage | Power Consumption |
|---|---|---|---|
24" Wide 220V | 208V, 220V, 240V | ~0.16 A/Ln ft | ~0.038 kW/Ln ft |
24" Wide 110V | 110V, 120V | ~0.32 A/Ln ft | ~0.038 kW/Ln ft |
12" Wide 220V | 208V, 220V, 240V | ~0.08 A/Ln ft | ~0.019 kW/Ln ft |
12" Wide 110V | 110V, 120V | ~0.15 A/Ln ft | ~0.018 kW/Ln ft |
5" Wide 110V | 110V, 120V | ~0.07 A/Ln ft | ~0.008 kW/Ln ft |
Versatility
Install your system under or over roofs of any shape or size. Our mats
1/8" Thick
Energy Efficient
Less than 0.018 kW/sq ft.
Power
Systems available in
120V, 208V, & 240V
to best suit your application
Why use heated mats vs. heating cable?
Heating cable offers single lines of heat, at a high operation cost, often results in a messy look and may present a burnout danger to your roof, while heated mats offer complete, safely regulated heating for areas vulnerable to snow buildup and ice damming at approximately half the operation cost, and a cleaner, smoother look.
Heated mats are a safer, more economic snow melting solution that can reliably relieve your roof or walkway from snow and ice.
Long Term Solution
No wires means no burnouts! Solve your snow and ice problems for years to come!
Customizable
Enjoy complete customization to fit your exact snow and ice melting needs!
Compliant
Tempurtech heated mats are the only heating products approved for use on roofs and compliant with your roof warranty!
Free Design Help
Tell us a little about what you want to protect, we'll do all of the heavy lifting to find a system that works for you!
Quick & Easy Installation
1
Roll Out Your Mats
With our innovative design, all you have to do is unbox and separate your mats, then simply roll them out.
No more struggling with heavy mats or awkward placement - our product makes setup a breeze!
2
Arrange Your System
Simply place your mats exactly where you want them with our quick and easy process.
No complicated instructions required - just set your mats where they need to go with your preferred securing method and you're done!
3
Connect To Power
Just connect your mats to an appropriate power source, and you're good to go!
No complicated setup, transformers, or power adapters needed - our snow-melting systems are quick and easy to set up and put to work!